| Title: | Forges or the art of making iron – [4] Fourth section |
| Original Title: | Forges ou art du fer – [4] Quatrième section |
| Volume and Page: | Plates vol. 4 (1765) |
| Author: | Unknown |
| Translator: | Jeremy Platt [AusIMM] |
| Original Version (ARTFL): | Link |
| Rights/Permissions: |
This text is protected by copyright and may be linked to without seeking permission. Please see http://quod.lib.umich.edu/d/did/terms.html for information on reproduction. |
| URL: | http://hdl.handle.net/2027/spo.did2222.0001.455 |
| Citation (MLA): | "Forges or the art of making iron – [4] Fourth section." The Encyclopedia of Diderot & d'Alembert Collaborative Translation Project. Translated by Jeremy Platt. Ann Arbor: Michigan Publishing, University of Michigan Library, 2010. Web. [fill in today's date in the form 18 Apr. 2009 and remove square brackets]. <http://hdl.handle.net/2027/spo.did2222.0001.455>. Trans. of "Forges ou art du fer – [4] Quatrième section," Encyclopédie ou Dictionnaire raisonné des sciences, des arts et des métiers, vol. 4 (plates). Paris, 1765. |
| Citation (Chicago): | "Forges or the art of making iron – [4] Fourth section." The Encyclopedia of Diderot & d'Alembert Collaborative Translation Project. Translated by Jeremy Platt. Ann Arbor: Michigan Publishing, University of Michigan Library, 2010. http://hdl.handle.net/2027/spo.did2222.0001.455 (accessed [fill in today's date in the form April 18, 2009 and remove square brackets]). Originally published as "Forges ou art du fer – [4] Quatrième section," Encyclopédie ou Dictionnaire raisonné des sciences, des arts et des métiers, vol. 4 (plates) (Paris, 1765). |
The plate captions have been translated but not the legends. To volunteer to translate the legends, please contact [email protected].
Fourth Section. Forges.
Plate I: Forges, Fourth Section, General Plan of a Forge with Two Furnaces
Plate II: Forges, Fourth Section, Longitudinal View of the Two-Furnace Forge and Development of the Tilt Hammer
Plate III: Forges, Fourth Section, Transversal View of the Two-Furnace Forge and Plan of the Foundation of the Tilt Hammer
Plate IV: Forges, Fourth Section,Flattening of Dross
Plate V: Forges, Fourth Section, Shingling of Dross
Plate VI: Forges, Fourth Section, Iron Forged Twice
Plate VII: Forges, Fourth Section, Rolling Muddled Iron
