Phenazines as chemosensors of solution analytes and as sensitizers in organic photovoltaics

This review aims to highlight phenazines as photoactive molecules with applications arising from its unique optical properties. Synthesis and optical spectra of a number of phenazines possessing absorption and emission signals in the visible range was reported. Applications described included sensing of cations, anions and as sensitizers in organic photovoltaics


Introduction
The planar structure of phenazine with a heterocyclic pyrazine core and a fully conjugated aromatic -system imparts to it special optical and redox properties.The optical properties render it useful for applications in molecular imaging as fluorescent tracers and stains for sub-cellular components and biological events.Some of the well-known fluorescent stains (Figure 1) for histological purposes possess a phenazine moiety as the core structure; eg.safranine 1 which is used as a counterstain in some staining protocols, 1 neutral red 2 used for staining lysosomes, 2 janus green B 3 a basic dye and a vital histological stain 3 and the intensely luminescent 2,3-diaminophenazine 4, useful for fluorimetric determination of laccase activity. 4ll these fluorescent phenazines have their absorption and emission spectra in the physiologically relevant region of 400-700 nm.On account of its planarity phenazine also serves as a strong DNA-intercalator thereby exhibiting potent anti-tumor and anti-microbial activity.Example include ligands based on dipyrido[3,2-a: 2',3'-c]phenazine (DPPZ) that have been used in preparing transition metal-phenazine coordination complexes 5, which were further studied for their DNA intercalative properties. 5In course of DNA-intercalation, phenazine absorption and fluorescence could vary substantially depending on the type of nucleotides present in a binding site.Fluorescent phenazines have also been used as selective cations 6 and anion binding agents 7 due to their optical spectral alterations and colorimetric changes upon analyte binding, whereby the latter would aid in the 'naked-eye' detection.These compounds are capable of intramolecular charge transfer (ICT), modulation of which by the analyte binding leads to the signal amplification and or ratiometric spectral shifts.Highly electron-rich and redox-active molecules such as phenazines could be useful for preparation of organic smart materials featuring donor-π-acceptor architecture. 8These are important for imparting red-light emissions for applications in organic light emitting devices (OLED), 9 as semiconductors in thin film transistors (TFT) 10 and as sensitizers in dye-sensitized solar cells (DSSCs). 11Existence of a donor-acceptor (D-A) alternating structure has been proved to be an effective way to reduce bandgap energies of conjugated polymers.Since the phenazine core consists of the electron withdrawing pyrazine ring which can be a good charge acceptor, phenazine-acene (PA) based polymers such as compound 6 (Figure 1) have been used for construction of low band gap organic materials. 12hile the synthesis, biological activity and huge natural products database on phenazines has been extensively reviewed, 13 there is also scope for reviewing the phenazines as a distinct class of photoactive heteroaromatic acenes, whose unique photophysical properties have rendered them useful as fluorescent dyes, chemosensors and as redox-active building blocks of organic materials.A review on heteroaromatic fluorescent dyes was published by Nau et.al in 201l 14 highlighting a number of well-known molecules and their supramolecular complexes with macrocycles.These include xanthenes, coumarins, squarines, and other polycyclic aromatic dyes bearing complex structures.The review deals with changes to their photophysical properties upon complexation with hosts such as cylcodextrin, cucurbit[n]turils.The structural simplicity and easy synthesis of the phenazine moiety in comparison to the other dyes mentioned does make it a good candidate for possible exploration for further modifications towards creation of a library of fluorescent phenazine based molecules.Thus, it is important to review the progress achieved so far in the field of synthesis and applications of photoactive phenazines.The, the aim of this review is to cover the preparation of photoactive phenazines, their optical spectral elucidation, report on the analysis of their molecular orbitals and highlight how phenazines have been used in solution analyte sensing and in organic photovoltaics.

Structure-optical property correlations of phenazine-based dyes
Theoretical studies have been carried out on the phenazines in order to explain effect of substituents on its optical spectra and nature of electron distribution.These studies elucidate the picture of the frontier molecular orbitals and thus are important for designing of phenazine based chemosensors and chemodosimeters.Appropriate placement of electron donor groups on the phenazine periphery in conjugation with its electron accepting pyrazine core would promote ICT giving rise to red-shifted optical spectra.This was found to be true for a number of examples.Robbins et.al have reported through theoretical studies on 2,3-dialkoxy phenazines that attaching halogen groups at the 7,8-positions of the phenazine core could reduce its lowest unoccupied molecular orbital (LUMO) energy level considerably.In addition, the attachment of long chain alkoxy groups in the 2,3-positions of the heteroaromatic core could act as strong electron donating groups increasing the extent of intramolecular charge transfer (ICT) and also help enhance solubility in organic solvents. 15A few examples of phenazines with halogen substituents at the 7,8-positions were prepared 16 (Scheme 1).

Scheme 1. Synthesis of halogen substituted dialkoxy phenazines.
The  max for compound 8 in the UV-visible absorption spectrum (Figure 2A) was red-shifted from 390 nm to 405 nm on proceeding from substituent H to F to Cl to Br.Within one type of halogen a further lowering of the LUMO energy was observed theoretically and experimentally when the number of halogen substituents was increased from two to four (Scheme 1 compound 10).If the dichloro-substituted phenazine 8Cl possessed a  max at 400 nm, its corresponding tetra-substituted derivative 10Cl was red-shifted to 410 nm (Figure 2B).This was again attributable to greater extent of LUMO stabilization upon addition of higher numbers of electron withdrawing halogen atoms to the phenazine core.Theoretical and experimental analysis of the optical properties of another analogous phenazine 2,3-diaminophenazine 4 were also performed.2,3-diaminophenazine (DAP) is a planar electron rich phenazine possessing strong luminescence in polar organic solvents as also in aqueous buffer solutions, notably when embedded inside a micelle structure. 17Through density functional theory (DFT) calculations Sylvestre et al. have performed vibration analysis and natural bond orbital analysis of DAP. 18Vibrational analysis indicates simultaneous existence of the C-C stretching mode for both its IR and Raman spectra thereby allowing delocalization of charge from electron donating amino groups to the phenazine ring.Additionally, the theoretically computed HOMO and LUMO energy gap closely matches with the observed  max peak at 419 nm in its UV-visible absorption spectrum (Figure 2A).Molecular electrostatic potential (MEP) analysis also revealed the highest degree of negative charge accumulation to be on the pyrazine nitrogen atoms (Figure 2B). 18Expectedly the 2,3-diamino group in 4 being a stronger electron donor than the 2,3-dialkoxy groups in 8 and 10 (Scheme 1) as reflected in the para-Hammett constants ( p values for -NH 2 is -0.66 and for -OEt is -0.25), 19 the extent of ICT in 4 is higher than that in 8 and 10 which is why the corresponding  max is modestly red-shifted (419 nm over 410 nm).A pH sensitive imidazole-fused phenazine 11 was reported by Ryazanova et.al 20 capable of exhibiting reversible optical spectral changes upon pH alterations between pH ranges from 0-14.The UV-visible spectral  max for 11 was centered on 440 nm under neutral pH conditions for these examples while the simple unmodified phenazine peak was at 400 nm in neutral aqueous buffer solutions. 20This difference could be attributed to a larger -electron system due to fusion of the imidazole ring with the phenazine nucleus.Under high pH conditions (~12) bathochromic shifting of the  max signal by about 60 nm was observed.The pka of 11 was spectrophotometrically determined to be 10.9.Hence, the observed red-shift was explained to originate from the deprotonation of the imidazole acidic hydrogen and further delocalization of the charge on the anionic nitrogen into the central phenazine core.This is also supported by the fact that if the imidazole acidic hydrogen is replaced by a sugar moiety the observed bathochromic spectral shift at alkaline pH (~12) disappears. 20Phenazine UV-vis spectrum itself is unaffected by increasing pH of the medium.11 exhibts a fluorescence emission in the biologically relevant region of 566 nm in aqueous buffer solutions of pH 6 and exhibit fluorescence turn-off behavior under strongly acidic pH. 20 UV-vis spectra of phenazines and perfluorophenazines are similar ( max = 362 nm and 367 nm respectively in hexanes), 21 however the aminoperflurophenazines are more red-shifted ( max at 456 nm in hexanes for 13a,  p values for -NHEt = -0.61 22) (Figure 5).The UV-visible spectrum of compound 13a exhibits positive solvatochromism and red-shifts by about 30 nm on proceeding from non-polar hexane to polar solvent ethanol.This observation could be explained by the increase in dipole moment of 13a from the ground state to the excited state (5.32 and 9.19 D respectively) whereby the more polarized excited state is better stabilized in the more polar solvent.While phenazine itself in non-fluorescent and perfluorphenazine is weakly emissive, the intense fluorescence of the amino substituted phenazines was evident from their measured fluorescence quantum yield values that were in the range of 0.92-0.98.The emission spectra of the prepared compounds possessed signals in the range of 524-613 nm.The fluorescence spectrum of compound 13a was also susceptible to positive solvatochromic changes, although the fluorescence intensity reduced drastically in more polar solvents. 21Thomas et. al. have described the synthesis and photophysical characterization of some amine-substituted benzophenazines prepared from o-naphthoquinones and aromatic/aliphatic amines (Scheme 3). 23The synthesis involves a Michael addition-oxidation reaction to generate the fully congujated aromatic intermediate 16 followed by a double condensation with o-phenylene diamine to yield the benzophenazines 17.
These molecules exhibited broad absorption peaks around 450 nm in toluene (Figure 6).The origin of the absorption peaks were primarily due to benzophenazine localized π-π* transitions and a minor component arising from charge transfer between the amine and pyrazine segment, as revealed through by DFT computations on the electronic structure of the dyes.The absorption spectra were bathochromically shifted by ~100 nm upon addition of 10 fold equivalents of trifluoroacetic acid (Figure 6).The optical spectral shifting was also visible to the naked eye as a colorimetric transition from yellow (neutral pH) to pink/purple color (acidic pH), fully reversible upon neutralization of the acid with added base.

Scheme 3. Synthesis of 3-aminobenzo[a]phenazines.
This prominent red-shifting behavior was attributed to protonation at the pyrazine moiety of the phenazine rendering it a better charge acceptor and resultant LUMO stabilization, while the alkyl/aryl amine component functioned as a charge donor.Theoretical calculations also supported these findings whereby the HOMO was mostly delocalized between the amine moiety and its adjacent phenyl rings, while the LUMO was mostly concentrated in the quinoxalino moiety, with overlapping regions with the HOMO.Upon protonation there is a shifting of the HOMO towards the quinoxalino ring (depending upon the donor strength of the amine unit), which promotes further charge transfer and hence bathochromic shifting of the optical spectrum.The benzophenazines exhibited moderate intensity emission spectra (quantum yields Φ = 0.18-0.27) in the range of 504 to 543 nm in toluene.They also exhibited a positive solvatochromic shift upto 600 nm and decrease of emission intensity.Upon acidification the emission intensity is reduced.The redox properties of the compounds studied using cyclic voltametric methods indicated low oxidation potentials for derivatives bearing more electron donating aliphatic amino donor groups and lower reduction potentials for derivatives with arylamino substituents.This also pointed to the presence of a charge transfer mechanism from the amino donor to the pyrazine acceptor, the strength of which depended on the overall electron donating ability of the amine group.A series of phenazine salens were synthesized through condensation reaction between 2,3-diaminophenazine and a number of 2-hydroxy-aryl aldehydes (Scheme 4). 24heme 4. Synthesis of phenazine salens.
The molecules exhibited strong absorption in the visible region and also moderate emission in the range of 500-550 nm with quantum yields Φ = 0.20 and 0.34 for 19 and 19b respectively.The compound with a strong donor diethylamino group 19b possessed the most-red shifted absorption spectrum (460 nm) (Figure 7).Compound 19b represents the most extended donor-acceptor unit in phenazines discussed thus far, originating from the diethylamino donor to the pyrazine acceptor through an alternate benzene-imine-benzene linkage.This would allow for extensive charge delocalization.p values for the closely related -NMe 2 group is -0.83, which is also the highest among all donor groups discussed thus far. 22The distribution of the charges in the frontier molecular orbitals in 19b also supports this statement where the HOMO was distributed over the entire molecule although with higher electron density on the electron rich phenyl rings, the LUMO was only localized in the phenazine moiety. 24Greater extent of conjugation in the salen bearing the napthyl moiety 19c rendered its absorption spectra more redshifted (420 nm) in contrast to molecule 19a (403 nm).The HOMO-LUMO energy gap for the three molecules also parallel their UV-visible optical spectra (2.92 eV for 19b, 3.06 eV for 19c and 3.30 eV for 19a). 24Since salens serve as ligands for several important metal ions, these phenazine based ligands could be useful in spectroscopic chemosensing of metal ions in solutions.

Phenazine-based probes as chemosensors/chemodosimeters for analyte sensing
The synthesis and optical properties of fluorescent phenazines having been discussed, it is important look at their applications as sensors of solution analytes.Bunz et.al. have described the synthesis of a triazole bearing phenazine 24 which was used as a fluorescence turn-off chemosensor for Ag + ions. 6The synthesis (Scheme 5) proceeded through coupling between di-alkynylated o-phenylene diamine 20 and o-benzoquinone 21 to construct the phenazine core 22.This was followed by a copper catalyzed 'click reaction' between the phenazine alkyne 22 and alkoxy substituted azide 23 to yield the triazole bearing phenazine 24.Since creating a system capable of analyte sensing in aqueous solution was important, the long chain triethyleneoxy group was incorporated.The UV-visible spectrum of 24 showed strong absorption in the region of 400-450 nm in dichloromethane and was blue shifted by about 20 nm in water, while the emission spectrum was red-shifted on proceeding from dichloromethane to water (559 to 569 nm) (Figure 8A, 8B).Phenazine 24 exhibited high degree of binding selectivity for Ag + ion as indicated by the extent of phenazine fluorescence quenching (Figure 8C) over Na +, K + , Li + , Mg 2+ , Ca 2+ , Zn 2+ , Cu 2+ , Ni 2+ , Hg 2+ , Cd 2+ , and Pb 2+ ions, when a dilute solution of metal ions was added incrementally to a solution of 24 in water.The presence of the triazole unit was also found to be necessary as the peralkynylated starting phenazine 22 was also tested for its metal binding ability and it exhibited fluorescence quenching only at very large excess concentrations of the analyte. 6The nature of the binding pocket with Ag + ion was investigated using theoretical calculations and also NMR titration methods to elucidate that the Ag + ion was ligated both by the pyrazine nitrogen atom and also the triazole nitrogen forming a cyclic six-membered coordination complex.The lowest energy conformation of 24 in absence of any Ag + ion is indicated in Scheme 6 by structure 24A, whereby the nitrogen based lone pair-lone pair repulsion between the pyrazine and triazole nitrogen atoms would be minimized.The rotamer 24B providing the metal ion binding pocket was 9 kcal mol -1 higher in energy on account of the said electron-electron repulsions.In 2D-NOESY NMR analysis it was revealed that only upon binding of Ag + ion a through space H-H correlation was found between the triazole H-atom (Ha) and the phenazine-2-position H-atom (Hb) as depicted in rotamer structure 24BAg.This added further credence to the indicated binding mode of the Ag + ion to the triazole-phenazine sensor.Given the many industrial applications of silver and its persistence in the environment, development of such a selective and sensitive water soluble chemosensor with an emission signal in the 570 nm range (away from background emission of biological tissue) is indeed valuable.
The optical properties of 2,3-diaminophenazine 4 having been described before, utilization of the same for colorimetric and fluorimetric detection of Cu 2+ ion at the sub-nano molar level has also been achieved by Udhayakumari et.al. 25 When a dilute acetonitrile solution of 4 was added to differently colored aq.solutions of metal ions (Fe 3+ , Co 2+ , Ni 2+ , Cu 2+ , Zn 2+ , Cd 2+ , Pb 2+ , Hg 2+ , Mn 2+ , Sn 2+ , Cr 3+ ), only in case of the Cu 2+ solution a decolorization was observed (green to colorless), indicating its highly degree of selectivity for Cu 2+ ion. 21Additionally to the Cu 2+ ion solution containing 4 were added the other mentioned cations, but no color changes were observed.This indicated that the complex formation between 4 and Cu 2+ ion was very stable.
The UV-vis absorption spectrum of 4 bearing a broad peak centered on 419 nm disappears completely upon addition of an aq.solution of Cu 2+ ion (Figure 9A).Only in the region below 250 nm there is marginal increase in absorbance.This was explained on the basis of theoretical calculations using DFT optimized structures of the free ligand and its metal complex to elucidate its HOMO and LUMO levels.It was found that the HOMO-LUMO gap in case of 4 was 2.96 eV while after complex formation with Cu 2+ ion it increased to 4.149 eV.This was due to stabilization of the HOMO as a result of complex formation with the metal center and further LUMO destabilization.Similarly, the fluorescence emission band of 4 at 500 nm also disappeared upon addition of a dilute solution of Cu 2+ ion and this fluorescence quenching was once again selective only for copper and independent of the counter anion (Figure 9B).Job's plot studies indicated formation of a 1:1 complex with copper (II) ion utilizing the 2,3-diamino groups as the donor atoms and the detection limit was measured to be 0.23 sub-nM.This fluorescence quenching was only observed within a pH range of 4-8 indicating that outside this pH range the phenazine-copper complex was not formed.The paramagnetic nature of Cu 2+ ion was attributed to be the reason for the fluorescence quenching observation, whereby the forbidden intersystem crossing (ISC) between the excited singlet state and low lying triplet state of the phenazine would be allowed, leading to a non-radiative relaxation. 25omplementary to the work done on using phenazines for cation detection, they have also been researched for chemosensing of anions in solution.Chauhan et.al. reported synthesis of a colorimetric receptor possessing bis-urea appended phenazine and its application in sensing and differentiation between fluoride, acetate and dihydrogen phosphate anions. 7The molecule was synthesized (Scheme 8) by refluxing a DMF/THF solution of 2,3-diamino phenazine with phenyl isocyanate.While the urea motif served as the anion receptor, the phenazine portion was the chromogenic signaling subunit exhibiting the optical spectral changes sensitive to the analyte anion.Upon addition of a number of anion aq.solutions (chloride, bromide, iodide, hydrogen sulfate, dihydrogen phosphate, acetate) the color of the DMSO solution of compound 25 changed to red only for fluoride and to different shades of orange for dihydrogen phosphate and acetate.All changes occurred at the micromolar to millimolar levels of anion concentration.The UV-vis spectrum of 25 red-shifts from the 400 nm peak to a new broad signal at 510 nm with incremental amounts of fluoride anion addition, while in case of the fluorescence emission spectrum, the signal at 610 nm for 25 is red-shifted to 645 nm bearing an isobestic point at 625 nm with intensity enhancement upon addition of fluoride ion (Figure 10).The fluoride on account of its small size and high electronegativity is able to interact most with the urea moiety through H-bonding, which in turn modulates the extent of charge transfer occurring in 25 resulting in the observed optical spectral changes.27, also bearing an electron deficient perfluorophenyl group. 26The compound was prepared as shown in Scheme 9 by fusing a solid mixture of 4, the perfluorophthalic anhydride 26 and zinc acetate.The compound was fully characterized by NMR, MS, IR and single crystal X-ray diffractometry, which showed a fully planar structure, indicating presence of an H-bonding interaction between the imidazolo hydrogen atom and the perfluorophenyl ring.Upon addition of dilute solutions of different anions (F -, Cl -, Br -, I -, NO 3  Job's plot analysis revealed formation of a 1:1 complex between the fluoride anion and compound 27.The nature of interaction between fluoride and 27 was investigated by proton NMR spectroscopy and it was found that upon addition of the fluoride, the signal for the imidazolo NH disappears which suggests that it could be involved with H-bonding with the F - anion.Also signals for the phenazine moiety H-atoms shift upfield due to increased electron density transfer from the imidazole ring to the phenazine itself.This greater extent of charge delocalization could possibly explain the appearance of the red-shifted absorbance peak in the UV-vis spectrum of 27.The important feature of this work was that the selectivity of 27 towards F -ion remained unchanged even when it was treated with an equimolar mixture of F -, Cl -, Br -, I -, NO 3 -, HSO 4 -, ClO 4 -, BF 4 -anions. 26ertain imidazole-phenazines have also been used as a chemosensor for Fe 3+ ion in DMSO solution.The detection lower limit was found to be at 4.8 × 10 -6 M concentration of Fe 3+ in DMSO and it showed selectivity for Fe 3+ in presence of other cations including Hg 2+ ,Ag + , Ca 2+ , Cu 2+ , Co 2+ , Ni 2+ , Cd 2+ , Pb 2+ , Zn 2+ , Cr 3+ , and Mg 2+ . 27The detection was possible due to a fluorescence turn-off behavior of the probe, whereby complexation with Fe 3+ diminished its fluorescence quantum yield Φ from 0.48 to 0.03 at the emission maximum of 533 nm.Filter paper strips coated with the sensor molecule as a test kit also exhibited a colorimetric turn-off response when drops of Fe 3+ solution in DMSO were added to it, providing a means of practical detection of Fe 3+ ions.
The lack of a coordinating sulfur atom in the molecule proved to be an advantage in terms of its reversibility, since the Hg 2+ ion sensed by the probe through coordination with the pyrrole and imidazole rings could be removed as HgS, rendering the probe available for further use.Filter paper strips coated with the sensor molecule as a test kit also exhibited a colorimetric turn-off response when drops of Hg 2+ solution in DMSO were added to it, providing a means of its practical detection.
Several examples of phenazine based chemosensors having been discussed, 6,7,[25][26][27][28] it is also noteworthy that phenazine based NIR active chemodosimeters for cyanide ion has also been prepared and tested successfully. 29The synthesis of compound 31 is outlined in Scheme 10 whereby the phenazine core The UV-visible spectrum of 31 has peaks at 570, 452, 360, and 293 nm of nearly equal intensity (Figure 12A).With incremental amounts of cyanide anion addition to an acetonitrile solution of 31, the 293 nm peak is enhanced, while the 570 nm peak disappears.Existence of an isobestic point at 316 nm indicated the presence of a new species due to cyanide addition.The saturation is reached at 3.2 equivalents of cyanide concentration.A plot of ratio of absorbances at 293 nm and 452 nm with increasing cyanide concentration gave a sigmoidal curve (Figure 12A inset).The fluorescence emission spectrum of 31 exhibited a NIR peak at 710 nm and upon addition of upto 3.2 equivalents of cyanide anion this peak was ratiometrically blue-shifted to 630 nm with an isoemissive point at 664 nm (Figure 12B).This suggested development of a new fluorophore due to cyanide addition to 31.The limit of detection was 0.2 nM which was lower than the 0.2 ppm limit for cyanide set by United States Environment Protection agency.A proton NMR spectrum of 31 was recorded in CD 2 Cl 2 and upon addition of cyanide anion, the signal at 7.96 ppm for the vinylic proton is upfield shifted to 4.28 ppm.This indicates that the dicyanovinyl moiety is acting as a acceptor group for nucleophilic attack of the cyanide anion to form the new species as indicated in Figure 13.The blue shifting in the optical spectra upon chemodosimetric cyanide detection was also explained through theoretical analysis of the frontier molecular orbitals of compound 31.In case of 31 there were two ICT mechanisms in operation from the central electron-rich nitrogen atoms to the peripheral dicyanovinyl and formyl groups.The LUMO for 31 was found to be mostly localized on the dicyanovinyl group, but upon cyanide addition the LUMO of the adduct was now localized onto the formyl group only, which was also of higher energy than the LUMO of , and HCO 3 -was also tested by mixing in 10-fold excess in presence of a solution of 31 and CN -ion and the results obtained were very satisfactory, since there was no change in the ratiometric optical response and colorimetric response of 31 towards cyanide anion.Additionally, even though 31 was insoluble in water, a solution of 31 in small amount of acetonitrile could be added to an aq.solution of cyanide ion for the chemodosimetric measurements. 29

Phenazines in organic photovoltaics
Red-absorbing and emitting phenazine based polymers have also been investigated in organic photovoltaics for artificial light harvesting applications. 12This is important since greater than 50% of the solar radiation incident on earth falls in the visible to NIR region. 30Suitable materials with low bandgap implying red-shifted absorptions can be created by incorporation of donor and acceptor groups in the molecule, whereby the HOMO is delocalized over the entire molecule though extensive charge transfer, but the LUMO is mostly centered on the acceptor moiety.Phenazines and thiadiazole extended phenazines with two thiophene units were synthesized as shown in Scheme 11 as donor-acceptor-donor charge transport materials. 31he thiophene units functioned as electron donor segments while the phenazine units behaved as the electron accepting segments.It was revealed through theoretical calculations and cyclic voltametric measurements that the dihedral angle between the phenazine and thiophene rings played an important role in the extent of orbital delocalization and consequently bandgap reduction in the materials.Compound 37 bearing the thiadiazole moiety was almost perfectly planar with nearly zero dihedral angle due to stabilizing interaction between the thiophene-3H and the thiadiazole nitrogen and the attractive interaction between the thiophene-S and pyrazine-N.In contrast the dihedral angle for compound 34 was nearly 15 degrees.The HOMO-LUMO gap for 37 was 1.43 eV while for compound 34 was 2.19 eV, a fact that could be attributed to the higher degree of orbital overlap in 37 due to its planarity as compared to 34.The UV-visible absorption spectrum of 34 (Figure 14) exhibited its longest wavelength peak at 485 nm with an extinction coefficient of 14000 cm -1 M -1 while the thiadiazole extended phenazine derivative 37 possessed the longest wavelength absorption peak in the NIR region at 745 nm.On account of its low bandgap the thiadiazole compound 37 was used in a bulk heterojunction (BHJ) solar cell as an interfacial nanolayer between the poly(3-hexylthiophene (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PC60BM) photoactive layer (1:1 weight ratio) and Al cathode.The thickness of the contact nanolayer of thiadiazole phenazine 37 deposited on the photoactive layer by spin-coating an acetonitrile solution of 37 was found vary between 2.4-6.0 nm.The highest power conversion efficiency (PCE) of the devices with the ntype interfacial nanolayer (6.0 nm) was 1.36% while the control device without the interfacial nanolayer possessed a PCE of 1.19%.Hence by including the low bandgap electron deficient small molecule 37 bearing a phenazine acceptor core, PCE of the device was increased by about 13%.The BHJ solar cell bearing the thiazdiazole phenazine contact layer exhibited a lower series resistance (R s ) and higher shunt resistance (R sh ) than the control cell indicating better electron extraction and transport through the contact layer. 31he carbazole group is generally considered to be a good electron donor group in organic photovoltaics.However, when attached to a highly electron-withdrawing benzophenazine unit on the nitrogen in the carbazole group it behaves as a good electron acceptor. 12Such modifications could also reduce the bandgap in materials to be evaluated for photovoltaic applications.The synthesis of carbazole-linked benzophenazine and its polymerization with a well-known electron donor group benzo[1,2-b:4,5-b']dithiophene (BDT) for photovoltaic applications was reported. 12cheme 12 shows the preparation of the modified carbazole phenazine acceptor 42 and its polymerization through double Stille coupling with the distannyl BDT donor group 43 to give rise to the carbazole-phenazine containing polymer 44.For the purpose of comparison distannyl BDT 43 was also polymerized with N-alkyl carbazole 45, to study the effect of phenazine incorporation.
The UV-vis spectra of a thin film of polymer 44 and corresponding polymer of N-alkyl carbazole 46 are shown in Figure 15.While for the non phenazine polymer there is only one strong absorption peak at 430 nm, the phenazine containing polymer showed two clear absorption bands at 428 nm and 660 nm.The 430 nm peak corresponded to the -* transition of the polymer chain and the 660 nm peak arises from an intramolecular charge transfer (ICT) from the electron donor BDT unit to the electron accepting phenazine carbazole moiety. 12The measured bandgap from theoretical calculations for the phenazine polymer 44 was 1.56 eV, while for the non-phenazine polymer 46 a much higher value of 2.41 eV was found, which was unsuitable for any photovoltaic applications.Hence the presence of the phenazine does play a role in reduction of band gap and rendering the polymer more useful for light harvesting purposes.Presence of the electron withdrawing phenazine group in 44 also rendered it oxidatively more stable as compared to the non-phenazine carbazole polymer.This was revealed from the oxidation potential value of 44 (-5.48 eV) measured by cyclic voltametric measurements, which was more negative than the corresponding value for the non-phenazine polymer 46 (-5.21 eV).This was due to the more negative HOMO energy level of 44 arising due to the presence of the electron withdrawing phenazine moiety than that of the non-phenazine polymer.The thin-film transistor (TFT) characteristics of the prepared polymer films were evaluated to determine whether they would behave as a p-type or n-type transistor, by fabricating the films over a silicon wafer.Both the phenazine containing polymer 44 and alkyl carbazole based polymer 46 showed p-type transistor characteristics with hole mobilities of 2.0 × 10 -4 and 3.6 × 10 -4 cm 2 V -1 s -1 respectively.On account of lower bandgap in phenazine containing polymer 44 the hole transport mobility value is higher than the non-phenazine polymer.Photovoltaic devices based on the prepared polymer films were fabricated using them as p-type electron donors, and [6,6]-phenyl C71-butyric acid methyl ester (PC 71 BM) as an n-type acceptor.The optimum device performance (2.33% PCE) was obtained for the phenazine containing polymer 44 and PC 71 BM in a 1:2 ratio with PEDOT:PSS as the hole transport layer (HTL) and a MoO 3 layer to buffer the acidity of the PEDOT:PSS layer.In contrast the best performance of the non-phenazine polymer was PCE of only 0.25%. 12n addition to being present as electron withdrawing subunits in polymeric materials prepared for photovoltaic applications, phenazine based small molecules have also been prepared with electron donor and acceptor groups, which have found use in dye sensitized solar cells (DSSCs).A near-infrared (NIR) organic sensitizer 53 (Scheme 13) with a dithieno-phenazine moiety containing a triaryl amine electron donor and a cyano acrylic acid based electron withdrawing unit was synthesized for quasi-solid-state dye-sensitized solar cells (DSSCs). 11The synthetic scheme is outlined in Scheme 13.Scheme 13.Synthesis of phenazine bridged donor-acceptor sensitizer.
The UV-visible absorption spectrum of compound 53 is outlined in Figure 16.In addition to the band above 400 nm arising from -* transitions of the conjugated molecular backbone, another prominent broad absorption band was found centered at 629 nm.This corresponded to the intramolecular charge transfer (ICT) transition between the donor triaryl amino group and the acceptor cyano acrylic acid unit attached through the phenazine moiety. 11The high degree of co-planarity of the dithieno-phenazine allows for effective orbital overlap and charge transfer between the donor and acceptor portions of the molecule.Hence a moderately intense absorption band in the red region (629 nm) could be found in 53, a fact that is significant for light harvesting applications.When adsorbed onto a mesoporous TiO 2 film the UV-visible spectrum is blue shifted to 621 nm due to deprotonation of the anchoring -CO 2 H group resulting in reduced electron withdrawing capability.The bandgap as measured from cyclic voltametric measurements was found to be 1.60 eV, which was in the acceptable range for photovoltaic applications.The performance of compound 53 as a photo-responsive dye in a TiO 2 solar cell was evaluated by preparing cocktail-type quasi-solid-state DSSCs co-sensitized with compound 53 and another known dye with a strong absorbance band at 542 nm 11 in a 2:8 molar ratio.The cosensitization was done so that the dye cocktail would have capability to absorb sunlight in the entire visible to NIR region.This DSSC with the dye mixture obtained an acceptable PCE value of 8.04% and the incident photon to current conversion efficiency (IPCE) was as high as 85%. 11he significance of these results lie in the fact that even the best recorded PCE value of 12.3% was obtained by using a heavily modified Zn-porphyrin, 32 i.e. a metal complex, which often are expensive to produce and may have complex synthetic protocols.Thus the compound 53 a metal-free all organic sensitizer being successfully used in a DSSC, opens up possibilities of cost-effective and environmentally friendly materials becoming available for DSSC applications.
An important feature of DSSC sensitizers is that their structure should be such so as to prevent  stacking between the sensitizer molecules and prevention of the I 3 -ions of the electrolyte from reaching the TiO 2 surface.11,12-Bis(hexyloxy) dibenzo[a,c]phenazine based molecule was proposed to be a photosensitizer which could have broad panchromatic UV-visible absorption due to its extensive conjugation.Additionally the hexyloxy groups located orthogonally to the molecular framework could prevent sensitizer stacking and act as a blocking group for I 3 -ions of the electrolyte from reaching the TiO 2 surface. 33The synthesis of sensitizer 61 based on a dibenzophenazine moiety is described in Scheme 14.The UV-visible spectrum spectra of compound 61 exhibits a broad absorption profile with a strong absorption band at 420 nm and a moderate band at 516 nm.While the 420 nm band arises from the * transition of the conjugated molecular backbone, the 516 nm band is attributed to an ICT transition from the triaryl amine donor group to the acceptor cyano acrylic acid group through the phenazine and hexyl thiophene moieties.Upon adsorption onto TiO 2 films the longest wavelength band is red-shifted to 525 nm.This proves that the presence of the bulky benzophenazine moiety prevents intermolecular aggregations leading to energy loss by unwanted molecular interactions. 33Compound 61 when immobilized onto a TiO 2 surface and evaluated as a photosensitizer thin film for DSSC applications provide PCE value of 7.18%, a respectable value for non-metallic all organic photosensitizers.The ICPE spectrum showed a broad band response profile and a maximum value of 65% at 525 nm arising from the better light harvesting ability of 61, due to presence of electron-withdrawing properties of the benzophenazine moiety as well as the strong electron-donating abilities of the methoxyl-substituted triphenylamine unit.

Conclusions
The phenazines represent a distinct class of polynuclear heteroaromatic molecules which can be altered chemically to exhibit broad panchromatic absorption and emission spectra.On account of such optical properties they can be used as chemosensors and chemodosimeters for various cations and anions.Complexation with metal ions such as Ag(I) in a specific binding pocket leads to a fluorescence turn-off response which can be used to detect presence of trace Ag(I) in environmental samples.Suitably modified phenazines have also exhibited chemodosimetric behavior towards cyanide anion detection in trace quantities, as reflected in the ratiometric hypsochromic shifting of the original NIR emission spectra of the parent molecule.A thorough theoretical study of a number of modified phenazines indicates presence of an intramolecular charge transfer from peripheral electron donor groups to the central electron deficient pyrazine ring.On account of this behavior it is possible to construct phenazine based donor-acceptor molecules and sensitizers.The utility of phenazine based donor-acceptor molecules was also reflected in their applications as broad spectral dyes in DSSCs and organic photovoltaics mainly due to their ability to produce sensitizers with narrow band gaps and acceptable PCE values up to 8.02%.
On account of their special optical properties there exists scope for further research into designing small molecules bearing and acceptor functional groups directly attached to the phenazine nucleus that could possess NIR optical spectra, which would be sensitive to presence of solution analytes such as cations/anions as well as pollutants such as polycyclic aromatic hydrocarbons and nitroaromatics.Additionally, preparation of more examples of phenazine based low-bandgap containing molecules will also enhance its use in the field of organic photovoltaics.

Figure 1 .
Figure 1.Examples of phenazine based dyes, metal complexes and polymers.

Figure 3 .
Figure 3. (A) UV-visible absorption spectrum of 4 in ethanol and (B) molecular electrostatic potential diagram of 4 indicating regions of high electron density in dark grey and low electron density in light grey; adapted from reference 18.

Figure 4 . 21 Scheme 2 .
Figure 4. UV-visible absorption spectra of 11 in different buffer solutions of varying pH; adapted from reference 20.

Figure 5 .
Figure 5. UV-visible and fluorescence spectrum of compound 13a reflecting its solvatochromic behavior; adapted from reference 21.

Figure 6 .
Figure 6.UV-visible spectrum of 17a in toluene under neutral pH and after incremental addition of upto 10 fold equivalents of trifluoroacetic acid; adapted from reference 23.

Figure 7 .
Figure 7. UV-visible spectrum (left) of 19b and it corresponding fluorescence spectrum (right) in acetonitrile; adapted from reference 24.

Figure 8 .
Figure 8. (A) UV-visible spectrum of 24 in DCM (dashed line) and water (solid line); (B) Fluorescence emission spectrum of 24 in DCM (dashed line) and water (solid line); (C) Plot of F 0 /F 1 (ratio of initial to final fluorescence intensity after metal ion addition) vs metal ions added showing high degree of fluorescence quenching upon Ag + ion addition; adapted from reference 6.

Figure 9 .
Figure 9. (A) UV-visible spectrum of 4 and hypsochromically shifted UV-visible spectrum of 4Cu(II) complex in acetonitrile indicating selective recognition of Cu(II) by 4; (B) Fluorescence emission spectrum of 4 and quenching of fluorescence upon formation of 4Cu(II) complex in acetonitrile; adapted from reference 25.

Figure 10 .
Figure 10.(A) UV-visible spectral changes of 25 upon incremental addition of fluoride anion in DMSO; (B) Fluorescence emission spectral changes of 25 upon incremental addition of fluoride anion in DMSO; adapted from reference 7.

Figure 11 .
Figure 11.(Left) UV-visible spectral changes of 27 upon addition of fluoride and other anions anion in acetonitrile, (Right) Fluorescence emission spectral changes of 27 in acetonitrile upon addition of fluoride and other anions; adapted from reference 26.

Figure 12 .
Figure 12. (A) UV-visible spectral changes of 31 in acetonitrile upon incremental addition of cyanide anion; (B) Fluorescence spectral changes of an acetonitrile solution of 31 upon incremental addition of up to 3.2 equiv cyanide anion; adapted from reference 29.

Figure 13 .
Figure 13. 1 H NMR spectrum of 31 in CD 2 Cl 2 (top) and after addition of 1.0 equiv. of cyanide anion (bottom); adapted from reference 29.

31 .
Hence only one ICT mechanism is now operational from the central nitrogen to the formyl group, thereby effecting a blue shifting of the absorption spectrum.The selectivity of compound 31 for CN -ion in presence of possible interfering ions such as F − , Cl − , Br -, I -

Figure 15 .
Figure 15.UV-visible spectra of polymer films of 44 and 46 on a quartz plate; adapted from reference 12.