Propeller-thrust/gradient/curves June 20, 1938
(3 drawings)
University of California, Civil Aeronautics Administration, Aviation Ground School 1939-1941 [series]
The Aeronautics Administration Aviation Ground School (University of California) series (1939-1941, 0.25 linear feet) contains teaching material such as lecture notes and exams while serving as a ground school instructor.
Box 2
CAA exam
Box 2
Correspondence
Box 2
Course information
Box 2
Course materials
(2 folders)
Box 2
Exams 1941
Box 2
Lectures 1939-1940
Box 2
Progress report on the Civil Aeronautics Authority's Pilot Training Program at the University of Michigan February 9, 1940
Lockheed Aircraft Corporation 1940-1945 [series]
The Lockheed Aircraft Corporation series (1940-1945, 1 linear foot) includes his work at Lockheed including correspondence, patents, as well several reports from aircraft equipment tests.
Box 2
Correspondence
Box 2
Patent designs 1942-1944
Reports and projects
Model-37
Box 2
[Stabilizer tests?] 1941
Box 2
Stabilizer and other drawings 1941-1942
Model-49
Box 2
Analysis of down-bending failures
Box 2
Operation-damage tests of proposed model-49 flap tracks undated
Box 2
Operation-damage tests of proposed model-49 flap-extending cables January 7, 1943
Box 2
Stiffener stresses 1940
Box 3
Test of control-cable tension governor December 23, 1942
Box 3
Tests of ducted-skin compression panels January 24, 1944
Box 3
Tests of floor-support structure in airplane no. 1962 of model-49 series undated
Model-89
Box 3
[Roller tests?] 1943-1944
Box 3
Tests and developments of proposed model-89 flap-system rollers and tracks 1945
Model-349
Box 3
Model-349 cargo floor panel tests February 2, 1943
Box 3
Pressure tests of proposed model-349 cabin windows undated
Box 3
Static tests of proposed model-349 floor structure November 30, 1942
Model XB-30
Box 3
Preliminary design and stress analysis of main rings-front stabilizer bulkhead-ring at station 150 September 16, 1940
Model-XP-58
Box 3
An investigation of the crushing loads imposed on using ribs by wing flexure April 2, 1941
Box 3
Tests to determine the characteristics of double-skin type of wing construction 1941
General and unidentified
Box 3
The construction and operation of the Lockheed electrical system for measuring strains November 7, 1941
Box 3
Various-unidentified
(3 folders)
Naval Training Schools [series]
Box 3
Chicago, Illinois
Box 3
Dearborn, Michigan
(5 folders)
National Shower Manufacturing Company and Later Work 1935-2000 [series]
The National Shower Manufacturing Company and Later Work series (3 linear feet, 1 oversize box, 11 tubes of drawings, and 1 oversize model, 1935-2000) includes his work at the National Shower Manufacturing Company, including patent and trademark applications, photographs of shower door and sandblasting designs, drawings, and showroom samples and models. Taubman's later work as a consulting engineer to his Florida factory can also be found in this series including his drawings of the electrostatic paint line as well as detailed notes of his daily activities (1992-2000) as tracked in his daily planners.
Box 4
Article about National Shower Manufacturing Company and anodizing plant 1957
Patents and Trademarks
Box 4
Correspondence 1952-1979
Box 4
Harness, Dickey & Pierce national infringement 1958-1961
Box 4
Bath enclosure application (case no.3) 1950
Box 4
Bath enclosure application July 21, 1950
Box 4
Towel bar application July 1950
Box 4
Trademark registration on N/S application August 2, 1954
Box 4
Trademark ("National") (603,823) March 29, 1955
Box 4
Trademark ("N/S") (603,824) March 29, 1955
Box 4
Shower door handle application (case no.6) 1955
Box 4
Bath enclosure patent (2,743,795) May 1, 1956
Box 4
Shower door handle application August 31, 1956
Box 4
Patent (2,783,860) March 5, 1957
Box 4
Bath enclosure patent (Canada) May 7, 1957
Box 4
Shower door handle patent (181,822) December 31, 1957
Box 4
Trademark ("Mirrall") (Canada) September 19, 1958
Box 4
Trademark ("Mirrall") (United States) September 8, 1959
Box 4
Shower door handle patent (2,904,368) September 15, 1959
Box 4
Trademark ("Spraymaster") (United States) December 15, 1959
Box 4
Trademark ("Spraymaster") (Canada) May 27, 1960
Box 4
Towel bar patent (2,940,719) June 14, 1960
Box 4
Patent (3,074,077) January 22, 1963
Box 4
Patent (3,075,255) January 29, 1963
Box 4
Rolling panel closure means patent (Canada) March 10, 1964
Box 4
Trademarks ("National," "N/S") renewal May 28, 1975
Box 4
Trademark ("Mirrall") renewal (684,626) September 8, 1979
Box 4
Trademark ("Spraymaster") renewal May 5, 1980
Box 4
Bath enclosure application, miscellaneous undated
Box 4
Rolling panel closure means application undated
Box 4
Sliding panel mountings undated
Box 4
Work orders 1965-1981
(2 folders)
Daily planners
Box 4
1992-1994
(3 folders)
Box 4
1997-2000
(4 folders)
Photographs
Box 5
First Mirroll rolling closet door installation 1958
Box 5
Plant and anodizing plant being built 1955
Shower doors
Box 5
Sandblasting designs
Box 5
Shower doors (and other doors)
(3 folders)
Box 5
Unidentified parts (shower door parts?)
Samples
Box 6
Miscellaneous brackets and metal pieces
Box 6
National Shower Manufacturing Company advertising stamp
Box 6
Shower door glass samples
(2 envelopes)
Box 6
Shower door model
(oversize, stored separately)
Drawings
Box 6
American Shower Door Company, Inc., instructions for completing and installing model no.500 knocked-down "American Maid" two-panel rollaway tub enclosure 1947
Box 6
Ex-cell-o Aircraft and Tool Corporation 1935
Box 6
General Motors Truck Company
Box 6
Micromatic Hone Corporation
Box 6
Miscellaneous
Paint line assembly drawings
Box 7
400 series (17 pc.)
Box 7
Accordion-shutter 1994
Box 7
Adjustable clip-forming die set 1992
Box 7
Adjustable paint-rack welding fixture 1993
Box 7
Ageing-oven cradle truck 1993
Box 7
Ageing-oven track system 1993
Box 7
Aluminum cradle 1996
Box 7
Cradle welding jig 1993, 1996
Box 7
Dryer tank system 1993
Box 7
Electrostatic-paint-line grounding system 1994-1996
Box 7
End turn 1996
Box 7
Equipment in paint building 1994, 1996
Box 7
H2SO4 platform 1993
Box 7
Hanger rod 1994-1996
Box 7
Load bar 1996-1998
Box 7
Monorail inter-building conveyor 1997
Box 7
Muntin milling head 1995
Box 7
New building 1996
Box 7
Off-line stationary hanger rod 1994
Box 7
Paint-booth grounding system 1994, 1996
Box 7
Paint line layout 1997
Box 7
Paint-line oven 1993, 1997
Box 7
Paint-rack spine 1992-1993
Box 7
Paint room and cure oven modifications 1994
Box 7
Plates and drive unit 1998
Box 7
Pre-paint treatment system 1997
Box 7
Powder booth 1991, 1993, 1996
Box 7
Powder paint line 1997
Box 7
Screen-door-assembly-bench base 1994
Box 7
Section no. 4267 shutter 1995
Box 7
Storage rack 1992, 1998
Box 7
Sunburst window frame trimmer 1994
Box 7
Tank farm 1998
Box 7
Track support 1998
Box 7
Tube rack 1992
Box 7
Warehouse aisle dolly 1992
Box 7
Warehouse-rack arms 1998
Box 7
Wheels 1998
Box 7
Unidentified
(7 folders)
Parts and other drawings
1947, 1951
Tube 3
Buffing equipment guards December 20, 1947
Tube 3
Drill jig -- tub enc. wall channel December 15, 1951
