Albert Kahn papers   1896-2011
full text File Size: 2311 K bytes | Add this to my bookbag

 
   Container / Location    Title
 
Dodge Brothers Factory Buildings, Detroit, Michigan ( 1910-1913) Job Nos. 449, 449-A, B, E, F & G) [subseries]:
 
Construction Drawings of Factory Building (Job No. 449) by Albert Kahn, Architect, Ernest Wilby, Associate
 
Architectural Drawings,  5/21/1910 except as noted (ink-on-linen drawings with pencil notations, 20x57-1/4 to 21x58 inches, except as noted)
Tube 54  
Plot Plan (1),  5/28/1910
Tube 54  
West Half of Foundation Plan (2), revised  7/21/1910
Tube 54  
East Half of Foundation Plan (3), revised  7/21/1910
Tube 54  
West Half of First Floor Plan (4), revised  6/21/1910
Tube 54  
East Half of First Floor Plan (5), revised  5/28/1910
Tube 54  
West Half of Second Floor Plan (6), revised  12/21/1910
Tube 54  
East Half of Second Floor Plan (7), revised  5/28/1910
Tube 54  
West Half of Third Floor Plan (8), revised  6/21/1910
Tube 54  
East Half of Third Floor Plan (9), revised  5/28/1910
Tube 54  
West Half of Fourth Floor Plan (10), revised  6/21/1910
Tube 54  
East Half of Fourth Floor Plan (11), revised  6/13/1910
Tube 54  
West Elevation (12), revised  6/21/1910
Tube 54  
East Elevation of Court (13), revised  6/29/1910
Tube 54  
East Elevation (14), revised  6/21/1910
Tube 54  
North and South Elevations of Court (15), revised  6/29/1910
Tube 54  
South Elevation and Roof Plan (16), revised  9/29/1910
Tube 54  
Typical Details of Front and Rear Elevations and Court (17)
Tube 54  
Miscellaneous Details (18)
Tube 54  
Bridge and Platform Details (19),  6/10/1910
Tube 54  
Site Plan for Pavement for Factory (33),  3/27/1911 (31-1/2x43-1/2 inches)
Tube 54  
Details for Bridge Enclosure at Machine Shop (37), revised  10/6/1911 (16-1/4x23-1/2 inches)
Tube 54  
Details for Changes to Windows (38),  10/2/1911 revised  11/10/1911 (19-1/4x27-1/4 inches)
Tube 54  
Plan of Stock Room (39),  1/16/1913 (26x44-3/4 inches)
 
Construction Drawings of Blacksmith (Forge) Shop at Dodge Factory (Job No. 449-A) by Albert Kahn, Architect, Ernest Wilby, Associate
 
Architectural Drawings,  6/11/1910 except as noted (ink-on-linen drawings with pencil notations, 20x58 inches, except as noted)
Tube 54  
Foundation Plan (1),  5/23/1910 revised  9/20/1910
Tube 54  
Floor Plan (2), revised  10/24/1910
Tube 54  
East and West Elevations (3)
Tube 54  
North and South Elevations, Sections and Roof Plan (4), revised  10/8/1910
Tube 54  
Details of Hammer Foundations, Outside Doors, Window Frames and Office Partitions (5),  6/2/1910 revised  6/11/1910
Tube 54  
Plan, Elevation and Section of Office and Machine Room at North End of Blacksmith Shop (11),  12/16/1910 (18x23-1/2 inches)
 
Structural Drawings,  5/17/1910 except as noted (ink-on-linen drawings with pencil notations, 19-1/2x58 inches, except as noted)
Tube 54  
Side and End Elevations and Section (1-S)
Tube 54  
South Elevation (1-S-A),  6/27/1910 (19x29 inches)
Tube 54  
Roof Plan (2-S)
 
Construction Drawings of Power Building at Dodge Factory (Job No. 449-B) by Albert Kahn, Architect, Ernest Wilby, Associate
 
Architectural Drawings,  6/16/1910 (ink-on-linen drawings with pencil notations, 18-1/2x24 inches, except as noted)
Drawer   23 Folder   6
Foundation Plan (1), revised  7/13/1910
Drawer   23 Folder   6
Floor Plan (2), revised  10/31/1910
Drawer   23 Folder   6
Roof Plan (3), revised  7/21/1910
Drawer   23 Folder   6
East and West Elevations (4), revised  10/31/1910
Drawer   23 Folder   6
North and South Elevations (5), revised  7/21/1910
Drawer   23 Folder   6
Cross-Section and Miscellaneous Details (6), revised  7/21/1910
Drawer   23 Folder   6
Typical Half-Bay Exterior Elevation and Details of Doors and Iron Stairs (7)
Drawer   23 Folder   6
Roof Framing Plan (8)
Drawer   23 Folder   6
Cross-Section and Detail of Steel Column and Girder (9)
Drawer   23 Folder   6
Details of Concrete Foundation for Chimney (10),  undated (14x21 inches)
Drawer   23 Folder   6
Plan, Elevation and Section of Support for Crane Beam (17),  9/29/1910 (19-1/2x19 inches)
Drawer   23 Folder   6
Revised Details of Stairs at South Side of Engine Room (18),  11/16/1910 revised  11/22/1910 (12-1/4x17 inches)
Drawer   23 Folder   6
Piping Plan (1-A),  9/7/1910 revised  10/31/1910 (33x39-1/2 inches)
Drawer   23 Folder   6
Cross-Sections Showing Tunnel (2-A),  9/9/1910 revised  10/31/1910 (33x39-1/2 inches)
Drawer   23 Folder   6
Plot Plan (3-A),  9/9/1910 revised  10/31/1910 (32x39-1/2 inches)
Drawer   23 Folder   6
Details of Britchen Smoke Connections, Ladders and Runway (4-A),  8/24/1910 revised  9/6/1910 (32-3/4x39-1/2 inches)
Drawer   23 Folder   6
Plan of Outlets for Wiring and Gables for Switch Board (5-A), revised  8/29/1910 (18x29 inches)
Drawer   23 Folder   6
Interior Elevation and Details of Window in Boiler Room (8-A),  undated (18-1/4x23 inches)
Drawer   23 Folder   6
Plan of Trolley Hoist,  undated (7-1/2x10 inches)
 
Construction Drawings of Office Building at Dodge Factory (Job No. 449-E) by Albert Kahn, Architect, Ernest Wilby, Associate
 
Architectural Drawings,  10/15/1910 except as noted (ink-on-linen drawings with pencil notations, 14-1/4x21-1/4 to 15x21-1/2 inches, except as noted)
Drawer   23 Folder   7
Foundation Plan (1),  undated
Drawer   23 Folder   7
First Floor Plan (2)
Drawer   23 Folder   7
Second Floor Plan (3), revised  3/13/1911
Drawer   23 Folder   7
Roof Plan (4)
Drawer   23 Folder   7
Front Elevation (5)
Drawer   23 Folder   7
North and South Elevations (6)
Drawer   23 Folder   7
Rear Elevation (7)
Drawer   23 Folder   7
Section A-A and Interior Elevations (8)
Drawer   23 Folder   7
Miscellaneous Details (9)
Drawer   23 Folder   7
Detail of Main Entrance (10)
Drawer   23 Folder   7
Section through Reception Room and Corridor, Second Floor, and Interior Elevations (11)
Drawer   23 Folder   7
Details of Rear Stair Hall and Office No. 214 (12)
Drawer   23 Folder   7
Structural Floor Plan, Roof Plan and Elevation (13)
Drawer   23 Folder   7
Details of Bridge Connecting Office and Factory Building (13),  11/4/1910 (19-1/2x32-1/2 inches)
 
Construction Drawing of Watchman's House at Dodge Factory (Job No. 449-F) by Albert Kahn, Architect, Ernest Wilby, Associate
 
Architectural Drawing,  9/26/1911 (ink-on-linen drawing, 18x27 inches)
Drawer   23 Folder   7
Plan, Elevations and Sections (1), revised  11/17/1911
 
Construction Drawings of Blacksmith Shop and Sheds at Dodge Factory (Job No. 449-G) by Albert Kahn, Architect, Ernest Wilby, Associate
 
Architectural Drawings,  9/28/1911 revised  10/10/1911 except as noted (ink-on-linen drawings with pencil notations, 21-1/2x55 to 22x56 inches)
Tube 54  
Foundation Plan and Structural Details (1),  9/16/1911 revised  4/6/1912
Tube 54  
Plot Plan (1-A)
Tube 54  
First Floor and Framing Plan and Roof Plan (2)
Tube 54  
East and West Elevations (3)
Tube 54  
North and South Elevations and Elevations in Court (4)
Tube 54  
Sections, Framing for North and South Elevations, and Detail of Typical Door, South Elevation (5), revised  11/17/1911
Tube 54  
Plan of Shed #1 and Miscellaneous Sections (6) (two drawings, one "superseded")